- $0.00 -->

Safco 48 x 18 in Office Shelving Add-On Unit

Item # S5292
Black 48 x 18 Inch Office Shelving Add-On UnitMagnifier
  • Black 48 x 18 Inch Office Shelving Add-On Unit
  • Gray 48 x 18 Inch Office Shelving Add-On Unit
This product has not yet been reviewed (Write a Review)

Free Ground Shipping Info


This office shelving add on unit will help expand your office space. It goes with the 48" X 18" Wire Shelving System. This unit attaches to existing wire shelving to form a continuous shelving unit for corner applications. The add-on unit includes four shelves, two posts and snap-together clips. It features strong welded wire construction and assembles in minutes without tools. The shelves adjust in 1" increments and each shelf holds up to 1000 lbs. (with weight evenly distributed). It is available in Black or Metallic Gray powder coat finish.

NOTE: This product comes with the shelving add-on unit only. The wire office shelving system is available for purchase separately.

Office Shelving Add On Features
  • Use this Add-On unit with the 48" X 18" Wire Shelving System
  • Unit attaches to existing wire shelving to form a continuous shelving unit for corner applications
  • Kit includes four shelves, two posts and snap-together clips
  • Strong welded wire construction
  • Shelves adjust in 1" increments
  • Assembles in minutes without tools
  • Each shelf holds up to 1000 lbs. (with weight evenly distributed)
  • Available in Black or Metallic Gray powder coat finish

Additional Features

Furniture Assembly: Tool-Free Assembly

Weight & Dimensions

Weight Measurements
53 Lbs. 72 In. H x 48 In. W x 18 In. D

Shipping Information

Free Ground Shipping
Ships via: FedEx Ground
Estimated Delivery Time
back to top

Product Reviews

Be the first to review this product.(Write a Review)
back to top back to top

Product Warranty

Limited Lifetime Warranty:

Safco warranty obligation:

We pledge to repair or replace, at Safco’s option, any Safco product or component that is defective in material or workmanship for as long as you, the original purchaser, own it. This warranty is subject to the provisions below.

Liability Limitations:

The following listed parts, components and supplies are covered under warranty in accordance with the below schedule following the product purchase date.
  • Twelve Years - Wood seating
  • Ten Years - Seating controls and Rumba Series Laminates
  • Five Years - Glides, casters, and polymer-based components, stacking chairs, user adjustable work surface mechanisms, seating upholstery fabrics, foam, laminates, veneer finishes and other covering materials, drawer glides and power strips.

Warranty Subject to Exclusions:

Exclusions pertaining to this warranty are as follows but are not limited to:

  • Product or product components utilized with the intent to rent or lease.
  • Freight damages; Safco is not liable for any product damages sustained during shipping or handling operations. Safco provides specific policies and requirements regarding shipping and handling and reserves the right to review and address product distribution matters separately.
  • Normal wear and tear.
  • Product negligence; A product is not considered defective upon improper installation, or misuse of the product or its components.
  • Alterations or attachments to the product that were not approved by Safco.
  • All corrugated products or components.
Safco’s warranty obligation is limited to normal use upon receipt of our products.

Normal commercial usage for seating is defined as the equivalent of a single shift, forty (40) hour workweek. To the extent that a seating product is used in a manner exceeding this, the applicable warranty period will be reduced in a pro-rata manner.

Models warranted for multiple shifts:
  • Task master® industrial series
  • Soft-tough® series
  • Workfit® polyurethane series

Warranty Procedures:

Please follow the warranty procedures described below to ensure aptly responsive service.

  1. Once a defect has been discovered, the original purchaser must contact Safco immediately (within 30 days of defect detection) with the serial number(s) from the product(s) in question.
  2. Upon inspection of the product(s), Safco will collect all relevant information necessary for review of the request.
  3. Product replacement, replacement parts, and repairs will be authorized by a customer service representative if acknowledged to be necessary under product warranty eligibility conditions.

Specific Limitations Regarding Color Variations, Fabrics and Finishes:

Natural products have varying grains and colors. Due to such natural variations occurring in materials such as wood and leather, these characteristics are not considered defects. Safco does not warrant the color-fastness or matching of colors, grains or textures of such materials.  Materials supplied, selected or provided by the customer (COM) are not warranted.

THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED OTHER THAN THOSE CLEARLY STATED HEREIN. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. Buyer is responsible for freight to and from factory on all warranty claims. Any description of the goods sold here under, including any reference to Buyer’s specifications and any description in catalogs, circulars and other written material published by Safco, is the sole purpose of identifying such goods and shall not create an express warranty that the goods shall conform to such description. SAFCO WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES NOR FOR ANY SUM IN EXCESS OF THE PURCHASE PRICE.